Coralife Bio Cube Bedienungshandbuch PDF herunterladen (Seite 8)

Filter Cartridge

Overow Tray

Refugium Strainer

Protein Skimmer

Aquarium Divider

Water Pump

Output Discharge

Nozzle

Sponge Filter

CHAMBER

3

CHAMBER

2

CHAMBER

1

Surface Intake

Bottom Intake

COMPLETED FILTER

ASSEMBLY

SAFETY:

1. Turn off all switches and unplug all power

cords from outlet or power source before

performing maintenance.

2. Visually inspect the aquarium and all parts

prior to installation to make sure nothing

has been damaged.

Filter Assembly and Setup

(Figure C4)

1. Remove left and right ltration covers, glass

canopy and Aqualight HQI.

2. Place protein skimmer in chamber 1 after

proper assembly and according to proper

placement instructions (pages 20-21).

3. Remove lter cartridge from the overow

tray in chamber 2 and its packaging. Rinse

thoroughly with cool freshwater and

reinstall in the overow tray.

4. Make sure that the overow tray and

refugium strainer are properly placed inside

chamber 2.

5. Make sure that the sponge lter is correctly

placed in chamber 3.

6. Make sure that the water pump is properly

assembled and connected to the return

output discharge nozzle.

BIOCUBE FILTER SETUP

FIGURE C4

Filter Startup Operation

(Figures C5 and C6)

1. Add substrate, rocks and décor

to the aquarium.

2. Prepare saltwater for aquarium, making sure

water is at room temperature.

3. Slowly add water to the aquarium. Make

sure to ll aquarium to the lower edge of

the top moulding (Figure C5).

4. Plug water pump cord into an outlet or

power source. Pump will raise the water

level in the aquarium section while draining

into the ltration section (Figure C6).

5. Observe and make sure that the water

circulation is owing properly from the

aquarium section into the ltration section.

6. Place glass top on aquarium.

7. Attach and plug in Aqualight HQI according

to instructions (page 10).

8. Once aquarium and ltration have run for

two days, and everything is functioning

properly, add livestock to the aquarium.

Precautions for Optimal Filter

Performance

1. Do not block or obstruct output discharge

nozzle.

2. Do not block or obstruct surface or bottom

level intakes.

3. Perform scheduled maintenance and

change lter cartridge as directed.

4. Observe scheduled maintenance on

water pump.

5. Make sure to perform scheduled water

changes and BioCube lter maintenance

according to instructions (page 26).

BIOCUBE FILTER STARTUP

INITIAL

FILL LEVEL

Fill

Level

Top Moulding

Aquarium

Section

Filtration

Section

FILL LEVEL

AFTER FILTER STARTUP

New

Fill Level

Original

Fill Line

Plug

In

Aquarium

Section

Filtration

Section

FIGURE C5

FIGURE C6

14

15

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare